enmotion towel dispenser manual
EnMotion Recessed Automated Towel Dispenser Manual
This manual provides instructions for installing, operating, and maintaining the enMotion Recessed Automated Touchless Towel Dispenser. It covers topics such as unpacking, mounting, loading towels, dispensing, and troubleshooting. The manual also includes information on warranty and contact details.
Introduction
The enMotion Recessed Automated Touchless Towel Dispenser is a high-quality, hygienic, and efficient solution for dispensing paper towels in restrooms and breakrooms. This manual provides comprehensive instructions for installing, operating, and maintaining the dispenser. It covers topics like unpacking, mounting, loading towels, dispensing, and troubleshooting. This manual is designed to help you get the most out of your enMotion dispenser and ensure its optimal performance.
Features and Benefits
The enMotion Recessed Automated Touchless Towel Dispenser offers numerous features and benefits designed to enhance hygiene, efficiency, and sustainability. Key features include touchless operation, adjustable sheet length, whisper-quiet dispensing, and extended battery life. The dispenser helps improve hygiene by eliminating the need for manual contact, reducing the spread of germs. Its touchless operation also promotes efficiency, reducing waste and saving time. The enMotion dispenser’s sleek and stylish design complements any restroom environment, while its whisper-quiet operation ensures a comfortable experience.
Installation Instructions
Installing the enMotion Recessed Automated Touchless Towel Dispenser is a straightforward process. This section provides detailed instructions on unpacking, mounting, and installing the battery pack. It is crucial to follow the steps carefully to ensure proper installation and functionality; Refer to the provided illustrations and diagrams for visual guidance. Remember to use the appropriate tools and supplies as specified in the manual. If you encounter any difficulties during the installation process, contact the manufacturer or a qualified technician for assistance.
Unpacking the Dispenser
Before beginning the installation process, carefully unpack the enMotion Recessed Automated Touchless Towel Dispenser. Ensure that all components are present and in good condition. The contents should include the dispenser unit, four D-cell alkaline batteries, an instruction guide, and a dispenser sublease agreement. Inspect the dispenser for any damage or defects. If any issues are found, contact the manufacturer or your distributor immediately. Once you have verified the completeness of the package and the condition of the dispenser, you are ready to proceed with the installation process.
Mounting the Dispenser
Locate the mounting slots inside the enMotion Recessed Automated Touchless Towel Dispenser. Secure the dispenser through these slots into studs or other appropriate mounting points. Refer to the provided installation instructions for specific guidance on positioning and securing the dispenser. Ensure that the dispenser is level and securely mounted before proceeding to the next step. If you are unsure about any aspect of the installation process, consult a qualified professional for assistance.
Installing the Battery Pack
The enMotion Recessed Automated Touchless Towel Dispenser comes equipped with a battery pack that powers the dispenser’s operation. To install the battery pack, locate the battery compartment on the back of the dispenser. Open the compartment and carefully insert the four D-cell alkaline batteries, ensuring that they are properly aligned with the positive and negative terminals. Close the battery compartment securely. Once the batteries are installed, the dispenser should be ready for use. If you encounter any issues or have questions about the installation process, consult the provided instruction manual or contact customer support for assistance;
Loading the Towel Roll
The enMotion Recessed Automated Touchless Towel Dispenser is designed to work with specifically engineered hard-wound roll towels. To load the towel roll, first, ensure you have the correct type of towels, typically marked with SKUs 89410, 89420, or 89430. Next, open the dispenser’s cover and locate the towel roll holder. Place the towel roll onto the holder, aligning the paper core with the center spindle. Ensure the roll is securely positioned and the paper end is hanging down towards the dispenser’s dispensing slot. Close the cover and pull out a towel to confirm the roll is properly loaded. If the dispenser is not dispensing towels correctly, refer to the troubleshooting section in the manual.
Choosing the Correct Towels
The enMotion Recessed Automated Touchless Towel Dispenser is designed to work with specific types of towels. To ensure optimal performance and proper dispensing, use only enMotion Recessed Towels, which are specifically engineered for this dispenser. These towels are available in various SKUs, including 89410, 89420, and 89430. Using other types of towels may result in malfunctions, jams, or incorrect dispensing. Always check the towel packaging to confirm compatibility with the enMotion Recessed Automated Touchless Towel Dispenser before loading the roll.
Loading the Roll
To load a new roll of enMotion Recessed Towels, follow these steps⁚
Open the dispenser cover. Locate the release tab on the dispenser and press it while lifting the cover upward.
Remove the empty roll. Carefully remove the empty roll from the dispenser.
Insert the new roll. Place the new roll of enMotion Recessed Towels onto the spindle, ensuring the end of the towel is hanging freely.
Close the dispenser cover. Gently press the cover down until it clicks into place.
Test the dispensing. Wave your hand in front of the sensor to ensure the dispenser dispenses a towel.
Operation
The enMotion Recessed Automated Touchless Towel Dispenser operates on 4 D-size alkaline cell batteries (included). The dispenser features 3 LEDs, including a low paper indicator, a motor/sensor activation light, and a low battery light; It has two dispensing modes⁚ sensor mode and hanging towel mode. In sensor mode, a new towel is dispensed when a hand is waved in front of the sensor. In hanging towel mode, a new towel is dispensed as soon as a towel is removed from the dispenser. The dispenser also features adjustable settings for paper sheet length and delay. For more detailed instructions on operation, refer to the enMotion Automated Towel Dispenser instruction manual included with the unit.
Dispensing Towels
The enMotion Recessed Automated Touchless Towel Dispenser delivers a single towel with a wave of the hand, reducing waste by up to 30 percent. The dispenser features a touchless design, which helps to improve hygiene by reducing the spread of germs. The enMotion dispenser is also very quiet, making it an ideal choice for restrooms and other sensitive areas. To dispense a towel, simply wave your hand in front of the sensor. The dispenser will automatically release a single towel. The dispenser also features a hanging towel mode, which dispenses a new towel as soon as a towel is removed from the dispenser. This feature is ideal for high-traffic areas where users may need to take multiple towels at a time.
Adjustable Sheet Length (ASL) System
The enMotion Dispensers Adjustable Sheet Length (ASL) system allows for adjustments in towel length. The ASL system is located inside the cabinet on the lower right side. To adjust the towel length, simply turn the knob to the desired setting. The sheet lengths are⁚ S Short towel (maximum number of hand dries) M Medium towel (optimal hand dry capacity). The ASL system helps to ensure that users have the right amount of towel for their needs. This helps to reduce waste and save money. The ASL system is a simple and effective way to customize the towel length to meet the needs of your facility.
Maintenance
Regular maintenance is essential for keeping your enMotion Recessed Automated Touchless Towel Dispenser operating efficiently and reliably. This includes replacing the batteries, cleaning the dispenser, and checking for any signs of wear or damage. Battery replacement is typically required every four years, and the dispenser will signal a low battery with a red light. Cleaning the dispenser regularly will prevent dirt and debris from accumulating and interfering with its operation. You can clean the dispenser with a mild soap and water solution. Be sure to dry the dispenser thoroughly after cleaning. It is important to inspect the dispenser regularly for any signs of wear or damage. This includes checking the dispensing mechanism, the sensor, and the battery compartment. If you notice any problems, contact the manufacturer or a qualified technician for assistance.
Battery Replacement
The enMotion Recessed Automated Touchless Towel Dispenser operates on four D-size alkaline batteries. To replace the batteries, follow these steps⁚
Locate the battery compartment on the back of the dispenser.
Use a Phillips screwdriver to remove the screws securing the battery compartment cover.
Remove the cover and carefully remove the old batteries.
Insert the new batteries, ensuring that the positive (+) and negative (-) ends are properly aligned.
Replace the battery compartment cover and secure it with the screws.
The dispenser will automatically reset and begin operating.
Cleaning the Dispenser
Regular cleaning is essential for maintaining the hygiene and functionality of the enMotion Recessed Automated Touchless Towel Dispenser. Here’s how to clean it⁚
Disconnect the power supply to the dispenser.
Use a soft, damp cloth to wipe down the exterior of the dispenser.
Avoid using harsh chemicals or abrasive cleaners, as they can damage the dispenser’s finish.
If necessary, use a mild soap solution to remove any stubborn stains.
Thoroughly dry the dispenser with a clean cloth.
Reconnect the power supply.
Troubleshooting
If you experience any problems with your enMotion Recessed Automated Touchless Towel Dispenser, refer to the following troubleshooting tips⁚
No Towel Dispensing⁚ Check if the towel roll is loaded correctly. Ensure the batteries are properly installed and have sufficient power. If the dispenser is still not dispensing towels, try restarting it by disconnecting and reconnecting the power supply.
Jammed Towel Roll⁚ If the towel roll is jammed, gently pull the towel from the dispenser to free it. If the jam persists, contact Georgia-Pacific for assistance.
Dispenser Not Responding⁚ Ensure the dispenser is receiving power. If the power supply is connected and the dispenser is still not responding, check the battery pack.
Sensor Not Detecting Hands⁚ Clean the sensor with a soft, damp cloth. Ensure there are no obstructions in front of the sensor.
Low Battery Indicator⁚ Replace the batteries with new ones.
Warranty Information
The enMotion Recessed Automated Touchless Towel Dispenser is covered by a limited warranty from Georgia-Pacific. The warranty covers defects in materials and workmanship for a period of one year from the date of purchase. This warranty does not cover damage caused by misuse, neglect, or improper installation. To make a warranty claim, contact Georgia-Pacific customer service at 1-866-HELLOGP (1-866-435-5647). Please have your purchase receipt and model number readily available.
Contact Information
For any questions or concerns regarding the enMotion Recessed Automated Touchless Towel Dispenser, please contact Georgia-Pacific customer service. You can reach them by phone at 1-866-HELLOGP (1-866-435-5647) or visit their website at www.gppro.com. For additional support, you can also contact your authorized distributor or refer to the included instruction guide.